FunnyPlaying

6 products

  • Games Console Sleeve

    FunnyPlaying Games Console Sleeve

    10 in stock

    Custom protection sleeve Compatible with Gameboy Pocket/Color/Advance Exterior Dimensions: 16cm x 10.5cm x 2cm Weight: 28.5g

    10 in stock

    £4.99

  • Clear GameBoy Color/GameBoy Pocket Speaker

    FunnyPlaying Clear GameBoy Color/GameBoy Pocket Speaker

    5 in stock

    GBC/MGB original speaker size, perfect fit. Stronger magnetic force and thinner diaphragm provide greater sound. Small package to avoid transportation damage. NOTES We collected the curve of the original speaker as close to it as possible through audio capture. But each person's sense of hearing will be different, we can not guarantee it the same as the original. WARNING The speaker film should not touch any objects to avoid damage.

    5 in stock

    £4.99

  • GameBoy Color RETRO PIXEL 2.0 IPS LCD Kit

    FunnyPlaying GameBoy Color RETRO PIXEL 2.0 IPS LCD Kit

    Out of stock

    Screen display area increased 25% than the original. Built-in 5 display effects. IPS panels are characterized as having the best color and viewing angles. LCD and ribbon power between 0.29W and 0.68W The maximum brightness of the panel is 230 cd /m² (Min.). What is Included: IPS LCD                                       × 1 GBC Ribbon                                × 1 20 mm wire                                 × 2 5 mm wire                                   × 1 NOTES Please test the screen kit before installing it into a shell. If the screen is damaged after installation it will not be covered under warranty. If you have any issues please contact us immediately.   At room temperature of 20℃, the backlight of LCD is set to the fourth gear. The test results are as follows: The minimum starting voltage for the original game card is 2VUse EZ Flash Junior burning green card minimum starting voltage is 2.05 V (Minimum starting voltage undergoes a change in temperature changes,We recommend to use 1.5 v voltage lithium battery) The built-in power management module of GBC motherboard is very inefficient. We design the power management module of LCD on the ribbon, so we need to weld a power cord to the ribbon and get power from the third pin down from the switch of the motherboard. The original display size of GBC is 43×41mmThe IPS LCD display size is 49.5 × 44.5mmThis means you need to cut the display frame of the screen to make it suitable for IPS LCD The leads of the START and SELECT buttons are retained on the ribbon.START+touch=increase brightnessSELECT + touch = decrease  brightnessPress START and SELECT simultaneously for 1 second to switch the display effect.(Short press the sensor button to cycle 7-segment brightness adjustment, long press to switch the display effect.) Built-in 5 display effects:Full pixel copy display (display the highest brightness, gorgeous and concise)Classic GBC display (perfectly restore the original display effect)Classic RGB display (perfectly restore the original display effect, and the pixel gap looks smaller, the brightness will be slightly darker)RGB display (closest to the original display, but the brightness is very low)Grid line display (close to the display effect of DMG) It is inevitable that there will be glue in the position of the lamp hole, which can be cleaned manually.  About 2.0 Modified the function of the SELECT+START combination key on the original basis.Long press the key combination to enter the function area, long press again to exit. Added logo backlight display and color change. Added the function of adjusting the position of the image window. Laminated the panel and lens

    Out of stock

    £49.99

  • GameBoy Color Retro Pixel Laminated Custom Shell

    FunnyPlaying GameBoy Color Retro Pixel Laminated Custom Shell

    19 in stock

    FEATURES IPS Screen Ready, no trimming required.  Removed the bracket in the middle of the battery compartment, will not affect the AA batteries and provides space for a lithium battery to be installed without trimming the shell. Compatible with original buttons. INCLUDED 1 x GameBoy Color Shell with matching battery cover 1 x Set of replacement screws (Internal and external screws) 1 x Matching infrared cover NOTES GBC buttons not included. Colors may vary slightly from what you see on your display This shell is compatible with the GBC Retro Pixel 2.0 IPS LCD Kit and the Hispeedido AMOLED Laminated kit. The housing does not support the Retro Pixel GBC 1.0 kit. 

    19 in stock

    £13.49

  • GameBoy Color Replacement Silicon Pads

    FunnyPlaying GameBoy Color Replacement Silicon Pads

    Replacement Silicone Pads for the GameBoy Color NOTES This only applies to GameBoy Color These are NOT original parts but a third party alternative.  Please be aware that due to differences in displays and devices, the actual color may differ slightly.

    £3.49

  • GameBoy Color Custom Buttons

    GameBoy Color Custom Buttons

    What is Included: 1 x GBC D-pad 1 x GBC A button 1 x GBC B button 1 x GBC power switch cover

    £4.49

Funnyplaying specialize in preserving the essence, sentiment, and nostalgia of retro gaming by producing modern solutions for handhelds and consoles. Funnyplaying specialize in custom mods and kits for NES, SNES, Game Boy, Game Boy Pocket, Game Boy Color, Game Boy Advance, and more!

© 2026 RGConsoles, Powered by Shopify

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Klarna
    • Maestro
    • Mastercard
    • PayPal
    • Shop Pay
    • Union Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account