Products
-
Giltesa Nintendo DS Lite: USB-C Mod
The Nintendo DS Lite USB-C kit is a custom board that lets you upgrade your device by replacing the original power connector with a modern, universal USB-C connector. Replace your old or damaged connector and upgrade to modern convenience. This USB-C mod kit lets you charge your device using any standard USB-C charger, including those for your smartphone or laptop. This board is compatible with the following models: Nintendo DS Lite FEATURES The USB-C connector matches 100% perfectly with the original connector shape. Charge your console using a wide range of modern USB power sources: USB power banks USB-A chargers USB-C chargers USB-C PD chargers (normal speed, not fast) USB-A to USB-C cables USB-C to USB-C cables INCLUDED 1 USB-C flexible board REQUIRED (NOT INCLUDED) Tri-wing screwdriver Phillips screwdriver Kapton tape (heat-resistant) Soldering iron Soldering tin (wire) Flux for electronics Desoldering pump Desoldering braid (mesh) Isopropyl alcohol (for cleaning) NOTES Unlike the previous version, which was just a connector, this one allows chargers and cables with a USB-C to USB-C connector, meaning full compatibility with any charger and cable. DOCUMENTATION Installation Guide PDF GitHub repository
£14.99
-
Giltesa Nintendo DSi, 2DS & 3DS: USB-C Mod (Supports data connection)
This product is a modified version of the Nintendo DSi, 2DS & 3DS USB-C Kit. It’s not a substitute but rather an alternative for customers who need specific functionalities. This product includes a shorter USB-C connector with data connection support. This means you can solder components to the USB board that require the connector to send or receive data via the USB protocol. The most common use case is for video capture boards that send video via USB to a computer. With this kit, you can have your DSi, 2DS or 3DS equipped with a single connector for both power and data, instead of needing two connectors: one for power and another for data. This product can never be used to access the console’s MicroSD.
£9.99 - £12.99
-
Giltesa Nintendo GameCube: USB-C Mod
The Nintendo GameCube: USB-C Kit is a board that allows you to replace the original power connector with a modern and standard USB-C port. If your original connector or power supply is too old or damaged and you need a new one, or if you would like to power your Nintendo GameCube with a standard USB-C PD charger, such as the charger for your phone or laptop, you can do so with this kit. This board is compatible with the following models: Nintendo GameCube (DOL-001) (1) (1) This mod is compatible with GameCubes that have this power board. If your GC has this other model, it is not compatible, since the power button needs to be reused, and in this version it isn’t a separate part that can be removed and reused. HOW DOES IT WORK? The USB-C Power Delivery technology (USB-C PD) allows for communication between the device and the charger, enabling the negotiation of the voltage to be supplied through the USB-C cable. In this case, the microchip included on this board is configured to request 12V, signaling to the charger that it requires 12V to operate. If the charger is compatible, it will supply the requested voltage. If it’s not compatible, nothing will happen, and the Nintendo GameCube won’t power on. FEATURES Exact shape for Nintendo GameCube. External power through USB-C. Extra fan connector for computer fans such as the Noctua NF-A4x10. INCLUDED 1 USB-C board. 1 Power connector. 1 Fan connector. 1 Fan connector with 3 pins. 1 Plastic cap for the USB-C board. REQUIRED (NOT INCLUDED) Original push button switch from the board to be replaced. 4.5mm gamebit and Phillips screwdrivers. Soldering iron. Tin. Flux. Desoldering pump. Isopropyl alcohol. NOTES This kit requires a special power supply that supports power delivery (PD) with an output of 12V and a minimum of 3A. Generally, laptop power supplies and some phone chargers can be used. If you don’t have any, take a look at the list of recommendations. (The Nintendo Switch power supply is not compatible because it doesn’t supply 12V). Ikea SJÖSS 45W 12V 3A, 13€ You will also need a USB-C to USB-C cable for PD. If you don’t have one, these will work: Ikea SITTBRUNN USB-C to USB-C 1m Ikea LILLHULT USB-C to USB-C 1.5 m DOCUMENTATION Installation Guide PDF GitHub repository
£16.99
-
Giltesa Nintendo NES: USB-C Mod
The Nintendo NES: USB-C Kit is a board that allows you to replace the original power connector with a modern and standard USB-C port. If your original connector is too old or damaged and you need a new one, or if you would like to power your Nintendo NES with a standard USB-C charger, such as the charger for your Nintendo Switch, phone, or laptop, you can do so with this kit. Moreover, with this board, you can remove the original, old, and inefficient power converter. Since the console operates at 5V, you only need power from the USB-C connection and a regular charger. This board is compatible with the following models: Nintendo NES FEATURES Exact shape for Nintendo NES. External power through USB-C. INCLUDED 1 USB-C board. 1 Cable of two wires. 1 Plastic cap for the USB-C board. 1 Plastic cap retainer. REQUIRED (NOT INCLUDED) Phillips screwdriver Cutting pliers Soldering iron / hot-air soldering station Tin Flux Desoldering pump Desoldering mesh Isopropyl alcohol NOTES This mod disables the video output through the antenna connector, so you will always need to use the AV output. DOCUMENTATION Installation Guide PDF GitHub repository
£14.99
-
Giltesa Nintendo Wii U GamePad: USB-C Mod
The Nintendo Wii U GamePad USB-C Kit is a custom board that lets you upgrade your console by replacing the original charging port with a modern, universal USB-C connector. Replace your old or damaged charging port and upgrade to modern convenience. This USB-C mod kit lets you charge your console using any standard USB-C charger, including those for your Nintendo Switch, smartphone, or laptop. This board is compatible with the following models: Nintendo Wii U GamePad FEATURES Charge your console using a wide range of modern USB power sources: USB power banks USB-A chargers USB-C chargers USB-C PD chargers (normal speed, not fast) USB-A to USB-C cables USB-C to USB-C cables INCLUDED 1 USB-C flexible board REQUIRED (NOT INCLUDED) Tri-wing screwdriver Phillips screwdriver Kapton tape (heat-resistant) Soldering iron Soldering tin (wire) Flux for electronics Desoldering pump Desoldering braid (mesh) Isopropyl alcohol (for cleaning) DOCUMENTATION Installation Guide PDF GitHub repository
£14.99
-
Giltesa Nintendo Wii: USB-C Mod
The Nintendo Wii: USB-C Kit is a board that allows you to replace the original power connector with a modern and standard USB-C port. If your original connector or power supply is too old or damaged and you need a new one, or if you would like to power your Nintendo Wii with a standard USB-C PD charger, such as the charger for your phone or laptop, you can do so with this kit. This board is compatible with the following models: Nintendo Wii Nintendo Wii Mini Nintendo Wii U HOW DOES IT WORK? The USB-C Power Delivery technology (USB-C PD) allows for communication between the device and the power supply(charger), enabling the negotiation of the voltage to be supplied through the USB-C cable. In this case, the microchip included on this board is configured to request 12V or 15V(1), signaling to the charger that it requires 12V or 15V(1) to run on. If the charger is compatible, it will supply the requested voltage. If it’s not compatible, nothing will happen, and the Nintendo Wii won’t power on. (1) The circuit has a selection jumper; if you solder it in one position, the circuit will require 12V, and if you solder it in the other position, it will require 15V from the power supply. FEATURES Similar size to the original connector. External power through USB-C. INCLUDED 1 USB-C board. 1 right-angle 2-pin header for Wii and Wii Mini 1 straight-angle 2-pin header for Wii U. 1 Plastic cap for the USB-C board (in black color) REQUIRED (NOT INCLUDED) Tri-wing and Phillips screwdrivers Soldering iron. Tin. Flux. Desoldering pump. Isopropyl alcohol. NOTES The Nintendo Wii and Wii Mini run on 12V and 3.5A, while the Nintendo Wii U runs on 15V and 5A. Make sure your power supply with Power Delivery (PD) can provide the necessary voltage for your console model. Also, ensure that the supplied current is equal to or as close as possible to the amount required by the console. The console’s disc reader consumes a significant amount of current, around 1.9A. So, if you don’t plan to use it for loading games, this can reduce the power requirements and allow you to use a power supply with lower specifications. All tests were conducted with the same power supply used for the GameCube kit, providing 12V or 15V and 3A: Ikea SJÖSS 45W 12V 15V 3A, 13€ You will also need a USB-C to USB-C cable for PD. If you don’t have one, these will work: Ikea SITTBRUNN USB-C to USB-C 1m Ikea LILLHULT USB-C to USB-C 1.5 m DOCUMENTATION Installation Guide PDF GitHub repository
£16.99
-
Giltesa PlayStation 2: USB-C Mod
The PlayStation 2: USB-C Kit is a board that allows to replace the original power supply unit for a modern and standard USB-C. If your original power supply unit is too old or damaged and you need a new one, or if you would like to power up your PlayStation with a standard USB-C PD charger, such as the charger for your phone, or laptop, you can do so with this kit. This board is compatible with the following models: PlayStation One PlayStation 2 FAT PlayStation 2 SLIM (SCPH-7XXXX external power supply) PlayStation 2 SLIM (SCPH-9XXXX internal power supply) HOW DOES IT WORK? The USB-C Power Delivery technology (USB-C PD) allows for communication between the device and the power supply(charger), enabling the negotiation of the voltage to be supplied through the USB-C cable. In this case, the microchip included on this board is configured to request 9V or 12V(1), signaling to the charger that it requires 9V or 12V(1) to run on. If the charger is compatible, it will supply the requested voltage. If it’s not compatible, nothing will happen, and the PlayStation won’t power on. (1) The circuit has a selection solder jumper; if you solder it in one position, the circuit will require 9V, and if you solder it in the other position, it will require 12V from the power supply. FEATURES Exact shape for PlayStation 2. External power through USB-C. INCLUDED 1 USB-C board. 1 Power cable of 5cm. 3 Plastic cap for the USB-C board (black color) REQUIRED (NOT INCLUDED) For PlayStation 2: a two-wire 20AWG cable. For PlayStation 2 Slim SCPH-9XXXX: the internal power cable. Phillips screwdriver Soldering iron Desoldering pump Desoldering braid (mesh) Soldering tin Flux Isopropyl alcohol (for cleaning) Instant adhesive (e.g., Loctite or Super Glue) NOTES The PlayStation One and PlayStation 2 SLIM SCPH-7XXXX run on 9V, while the PlayStation FAT and PlayStation SCPH-9XXXX run on 12V. Make sure your power supply with Power Delivery (PD) can provide the necessary voltage for your console model. Also, ensure that the supplied current is equal to or as close as possible to the amount required by the console. All tests were conducted using the same power supply as the rest of our kits, providing: Ikea SJÖSS 45W 9V 12V 3A, 13€ You will also need a USB-C to USB-C cable for PD. If you don’t have one, these will work: Ikea SITTBRUNN USB-C to USB-C 1m Ikea LILLHULT USB-C to USB-C 1.5 m If your PS2 is the FAT model and you are going to use a hard drive, then you will need a power supply that provides more than 3A of current. Maybe 5A; otherwise, you may have startup issues. DOCUMENTATION Installation Guide PDF GitHub repository
£17.99
-
Giltesa PlayStation 4 DualShock Controller: USB-C Mod (All models)
The PlayStation 4 DualShock USB-C Kit is a custom board that lets you upgrade your controller by replacing the original MicroUSB connector with a modern, universal USB-C connector. Replace your old or damaged MicroUSB and upgrade to modern convenience. This USB-C kit lets you charge your controller using any standard USB-C charger, including those for your smartphone or laptop. This board is compatible with all revisions of PS4 controllers: PlayStation 4 DualShock 1st Gen (2013~2016) JDS-001 JDS-011 JDS-030 PlayStation 4 DualShock 2nd Gen (2016~2021) JDS-040 JDS-050 JDS-055 FEATURES Compatible with all versions of the PS4 controller. No soldering required. Includes longer new flexible flat cables for even easier installation. Charging your PS4 controller with: USB power banks USB-A chargers USB-C chargers USB-C PD chargers (normal speed, not fast) USB-A to USB-C cables USB-C to USB-C cables USB data support, like the original MicroUSB connector. INCLUDED 1 USB-C board 1 Flexible Flat Cable 12P 10CM 1 Flexible Flat Cable 14P 15CM REQUIRED (NOT INCLUDED) Phillips screwdriver Plastic opening tools Precision Diamond File Set Cutter DOCUMENTATION Installation guide PDF GitHub repository
£14.99
-
Pokemon Stadium (Boxed)
Pokemon Stadium boxed with manuals for the N64.
£79.99
-
RetroScaler BlueRetro Wireless Controller Adapter For Game Cube
RetroScaler BlueRetro Wireless Game Controllers Adapter For Gamecube and Wii Compatible with PS3/PS4/PS5/Xbox One S/Xbox Series X|S/Wii/Wii U Pro/Switch Pro/Switch Joycon/8bitdo/Retro-Bit Wireless Controllers, etc. Features: Up to 4 Bluetooth controllers can connected paired simultaneously. Button remapping through the web Bluetooth port on chrome. More Controller Pairing Guide: https://github.com/darthcloud/BlueRetro/wiki/Controller-pairing-guide Note: The 8bitdo m30 controller is in joystick mode by default. Please press and hold the "Up" + "Select" keys on the controller for about 5 seconds to switch it to D-pad mode to solve the button non-working problem.
£29.99
-
RetroScaler BlueRetro Wireless Controller Adapter For N64
RetroScaler BlueRetro Wireless Game Controllers Adapter For Nintendo 64 Compatible with PS3/PS4/PS5/Xbox One S/Xbox Series X|S/Wii/Wii U Pro/Switch Pro/Switch Joycon/8bitdo/Retro-Bit Wireless Controller, etc. Features: Up to 4 Bluetooth controllers can connected paired simultaneously. Button remapping through the web Bluetooth port on chrome. Note: The 8bitdo m30 controller is in joystick mode by default. Please press and hold the "Up" + "Select" keys on the controller for about 5 seconds to switch it to D-pad mode to solve the button non-working problem. Link to controller pairing guides: https://github.com/darthcloud/BlueRetro/wiki/Controller-pairing-guide
£29.99
-
RetroScaler BlueRetro Wireless Controller Adapter For NGC/Wii
RetroScaler BlueRetro Wireless Game Controller Adapter for the Nintendo Gamecube/Wii. Compatible with Xbox/Wii/Wii U Pro/Switch Pro/Switch Joycons/8bitdo/PS3/PS4/PS5 wireless controllers. Link for button remapping: https://https://blueretro.io/ Note: The 8bitdo m30 controller is in joystick mode by default. Please press and hold the "Up" + "Select" buttons on the controller for about 5 seconds to switch it to D-pad mode to solve the button non-working problem.
£19.99
-
RetroScaler BlueRetro Wireless Controller Adapter For PS1 and PS2
RetroScaler BlueRetro Wireless Game Controller Adapter for the PS1 and PS2. Compatible with PS3 / PS4 / PS5 / Xbox One S / Xbox Series X|S /Wii / Wii U Pro Switch Pro / Switch Joycon / 8bitdo / Retro-Bit Wireless Controllers, etc. Features: The button mapping settings can be configured through Web Bluetooth pages. Supports controller rumble function. Compatible with all PS1 and PS2 consoles. Note: The 8bitdo m30 controller is in joystick mode by default. Please press and hold the "Up" + "Select" keys on the controller for about 5 seconds to switch it to D-pad mode to solve the button non-working problem. Controller Pairing Guides: https://github.com/darthcloud/BlueRetro/wiki/Controller-pairing-guide
£19.99
-
RetroScaler BlueRetro Wireless Game Controller Adapter For N64
RetroScaler BlueRetro Wireless Game Controller Adapter for the Nintendo 64. Compatible with Xbox/Wii/Wii U Pro/Switch Pro/Switch Joycons/8bitdo/PS3/PS4/PS5 wireless controllers. Features: Wireless firmware updates Support rumble and memory pak (virtual). Button remapping through the web Bluetooth port on chrome. Note: This product can't support hot plugging. Please insert it into the controller port before turning on the power of the console. The 8bitdo m30 controller is in joystick mode by default. Please press and hold the "UP" + "Select" buttons on the controller for about 5 seconds to switch it to D-pad mode to solve the button non-working problem.
£19.99
-
RGBS To HDMI Upscaler Adapter for Mega Drive, Genesis 1/2, SNK
Convert your classic Mega Drive, Genesis, and SNK consoles to a 1080P HDMI output with this RGBS upscaler adapter. Enjoy lossless audio and video on modern TVs, monitors, and projectors. The dual console switch ensures compatibility across MD1, MD2, and SNK systems, while aspect ratio switching lets you choose between 16:9 and 4:3 formats. Supports input resolutions from 240p to 576p, covering all your retro gaming needs. Truly plug-and-play—just connect your RGBS cables and power via the included micro-USB cable. Compact design (75mm × 45mm × 15mm) fits neatly behind your setup. Rated 5V/1A for reliable, stable operation. Features: 1) Compatible with all version of MD1/MD2/SNK consoles.2) Support input resolution: 240p, 288p, 480p, 480i, 576i, 576p.3) SNK/MD switch works for compatibility with all the SNK/MD consoles.4) Video input Mode: RGBS5) Video Output Mode; 1080P HDMI6) Supports aspect ratio switching 16:9/4:3.7) Easy to use, plug and play with well-prepared cables. - Needs an extra micro-USB cable (included in the box) for power supply.
£24.99
-
Giltesa SEGA Master System & Mega Drive: USB-C Mod (All models)
The SEGA Master System & Mega Drive USB-C Kit is a custom board that lets you upgrade your console by replacing the original power connector with a modern, universal USB-C connector. Replace your old or damaged power connector and upgrade to modern convenience. This USB-C mod kit lets you power your console using any standard USB-C charger, including those for your smartphone or laptop. This board is compatible with the following models: Master System 1 (1) Master System 2 (1) Mega Drive 1 (1) Mega Drive 2 (1) (1) There were so many mainboard revisions of each model; before purchasing, make sure your console, motherboard, and connector match the ones shown in the installation guide. FEATURES External power through USB-C. Fully compatible with any USB-C charger: USB power banks USB-A chargers USB-C chargers USB-C PD chargers USB-A to USB-C cables USB-C to USB-C cables INCLUDED 1 USB-C board 1 Mega Drive 1 board adapter 1 Plastic cap for the USB-C board 5 Single-pin headers 4 wires REQUIRED (NOT INCLUDED) Phillips screwdriver Soldering iron Kapton tape Soldering tin Flux Desoldering pump Desoldering braid Isopropyl alcohol DOCUMENTATION Installation guide PDF GitHub repository
£14.99
-
Giltesa Sony PS Vita Slim: USB-C Mod
The Sony PS Vita Slim USB-C Kit is a custom board that lets you upgrade your console by replacing the original charging port with a modern, universal USB-C connector. Replace your old or damaged charging port and upgrade to modern convenience. This USB-C mod kit lets you charge your console using any standard USB-C charger, including those for your smartphone or laptop. This board is compatible with the following models: Sony PS Vita Slim FEATURES Charge your console using a wide range of modern USB power sources: USB power banks Standard USB-A wall chargers Modern USB-C wall chargers USB-C Power Delivery (PD) chargers (normal charging speed) USB-A to USB-C cables USB-C to USB-C cables USB data support for data transfer. INCLUDED 1 USB-C flexible board. REQUIRED (NOT INCLUDED) Phillips screwdriver Soldering iron / Hot air rework station Desoldering pump Desoldering braid (mesh) USB microscope Tweezers Scissors Cutting pliers Precision cutter Soldering tin Flux Solder mask Isopropyl alcohol (for cleaning) Kapton tape DOCUMENTATION Installation Guide PDF GitHub repository Installation video by Alien Gaming
£14.99
-
Sony PS Vita: USB-C Mod
The Sony PS Vita USB-C Kit is a custom board that lets you upgrade your console by replacing the original charging port with a modern, universal USB-C connector. Replace your old or damaged charging port and upgrade to modern convenience. This USB-C mod kit lets you charge your console using any standard USB-C charger, including those for your smartphone or laptop. This board is compatible with the following models: Sony PS Vita (Vita 1000) FEATURES Charge your console using a wide range of modern USB power sources: USB power banks USB-A chargers USB-C chargers USB-C PD chargers (normal speed, not fast) USB-A to USB-C cables USB-C to USB-C cables USB data support. INCLUDED 1 USB-C board 2 cables 1 plastic cap to cover the hole (in black color) REQUIRED (NOT INCLUDED) Phillips screwdriver Soldering iron / Hot air rework station Desoldering pump Desoldering braid (mesh) USB microscope Tweezers Scissors Cutting pliers Precision cutter Soldering tin Flux Solder mask Isopropyl alcohol (for cleaning) Kapton tape DOCUMENTATION Installation guide PDF GitHub repository Video installation by Zac Builds
£14.99
-
Giltesa Sony PSP 1000: USB-C Mod
The Sony PSP USB-C Kit is a custom board that lets you upgrade your console by replacing the original charging port with a modern, universal USB-C connector. Replace your old or damaged charging port and upgrade to modern convenience. This USB-C mod kit lets you charge your console using any standard USB-C charger, including those for your smartphone or laptop. This board is compatible with the following models: Sony PSP 1000 FEATURES Plastic holder made by a resin 3D printer. Charge your console using a wide range of modern USB power sources: USB power banks USB-A chargers USB-C chargers USB-C PD chargers (normal speed, not fast) USB-A to USB-C cables USB-C to USB-C cables USB data support, allowing you to connect two cables to the MiniUSB port (optional, cables not included). INCLUDED 1 USB-C board 1 plastic part to hold the USB board (in grey color) REQUIRED (NOT INCLUDED) The power cable from the original connector. Phillips screwdriver Soldering iron Tweezers Precision cutter Precision file tool set Soldering tin Isopropyl alcohol (for cleaning) Instant adhesive (e.g., Loctite or Super Glue) DOCUMENTATION Installation guide PDF GitHub repository
£12.99
-
Giltesa Sony PSP 2000/3000: USB-C Mod
The Sony PSP USB-C Kit is a custom board that lets you upgrade your console by replacing the original charging port with a modern, universal USB-C connector. Replace your old or damaged charging port and upgrade to modern convenience. This USB-C mod kit lets you charge your console using any standard USB-C charger, including those for your smartphone or laptop. This board is compatible with the following models: Sony PSP 2000 Sony PSP 3000 FEATURES Plastic holder made by a resin 3D printer. Charge your console using a wide range of modern USB power sources: USB power banks USB-A chargers USB-C chargers USB-C PD chargers (normal speed, not fast) USB-A to USB-C cables USB-C to USB-C cables INCLUDED 1 USB-C board 1 plastic part to hold the USB board (in grey color) 2 heat shrink tubes REQUIRED (NOT INCLUDED) The power cable from the original connector. Phillips screwdriver Soldering iron Tweezers Precision cutter Precision file tool set Soldering tin Isopropyl alcohol (for cleaning) Instant adhesive (e.g., Loctite or Super Glue) DOCUMENTATION Installation guide PDF GitHub repository
£12.99
-
Giltesa Sony PSP Go: USB-C Mod
The Sony PS Go USB-C Kit is a custom board that lets you upgrade your console by replacing the original charging port with a modern, universal USB-C connector. Replace your old or damaged charging port and upgrade to modern convenience. This USB-C mod kit lets you charge your console using any standard USB-C charger, including those for your smartphone or laptop. This board is compatible with the following models: Sony PSP Go FEATURES Charge your console using a wide range of modern USB power sources: USB power banks USB-A chargers USB-C chargers USB-C PD chargers (normal speed, not fast) USB-A to USB-C cables USB-C to USB-C cables USB data support INCLUDED 1 USB-C board 2 cables 1 plastic cap to cover the hole (in grey color) REQUIRED (NOT INCLUDED) Phillips screwdriver Soldering iron / Hot air rework station Desoldering pump Desoldering braid (mesh) USB microscope Tweezers Scissors Cutting pliers Precision cutter Soldering tin Flux Solder mask Isopropyl alcohol (for cleaning) Kapton tape NOTES With this modification, you will lose the ability to connect the console to the TV. DOCUMENTATION Installation guide PDF GitHub repository
£14.99
-
SP Tactile Buttons
Adds GBA SP tactile buttons to the board
£24.99
-
Giltesa Super Nintendo: USB-C Mod
The Super Nintendo: USB-C Kit is a board that allows you to replace the original power connector with a modern and standard USB-C port. If your original connector is too old or damaged and you need a new one, or if you would like to power up your Super Nintendo with a standard USB-C charger, such as the charger for your Nintendo Switch, phone, or laptop, you can do so with this kit. Moreover, with this board, you can remove the original, old, and inefficient power converter. Since the console operates at 5V, you only need the power from USB-C and a regular charger. FEATURES Exact shape for Super Nintendo / Super Famicom. External power through USB-C. INCLUDED 1 USB-C board. 1 Power cable. 1 Plastic cap for the USB-C board. REQUIRED (NOT INCLUDED) 4.5mm gamebit and Phillips screwdrivers. Cutting pliers Cutter Tin soldering iron. Tin. Flux. Isopropyl alcohol. NOTES Check the compatibility tab for more details on which models are compatible. DOCUMENTATION Installation Guide PDF GitHub repository
£14.99
-
Tomi Adorable Kawaii Figurine - Blind Box
Discover the charm of mystery with the Tomi Adorable Kawaii Figurine Blind Box. Each box contains a delightful collectible figure featuring cute, expressive designs that capture hearts instantly. Perfect for collectors and fans of kawaii culture, every unboxing brings excitement and the thrill of discovering which adorable character you'll receive. With multiple designs to collect, build your complete set and enjoy the joy of surprise with each purchase. Individual blind boxes.
£5.99
-
Tomi Food Market Figurine - Blind Box
Step into the delightful world of Tomi Food Market with this exciting blind box collectible. Each mystery box holds a unique figurine featuring charming food-themed characters with intricate details and vibrant finishes. Whether you're a seasoned collector or new to blind boxes, the thrill of the unknown makes every unboxing special. Hunt for rare variants, complete your collection, or share the joy with friends. A must-have for anyone who loves cute collectibles and surprise elements. Individual blind boxes.
£5.99
-
Tomi Lucky Cat Figurine - Blind Box
The Tomi Lucky Cat Figurine brings timeless charm and prosperity symbolism to any space. This iconic beckoning cat features the traditional waving paw gesture believed to attract good fortune and positive energy. Crafted with attention to detail, it makes a thoughtful gift for collectors, home décor enthusiasts, or anyone seeking a touch of cultural elegance. Perfect for shelves, desks, or retail displays, this figurine combines aesthetic appeal with meaningful tradition. Individual Blind Boxes
£5.99
-
Tomi Picnic Kitty Figurine - Blind Box
Discover the charm of the Tomi Picnic Kitty Figurine, a delightful blind box collectible that brings mystery and joy to your collection. Each box contains a unique feline character ready for a whimsical picnic adventure. Perfect for collectors and fans of cute, detailed figurines, these blind boxes offer the thrill of the unknown with every purchase. Display your Picnic Kitty on shelves, desks, or anywhere that needs a touch of playful personality. Ideal for gift-giving or building your own charming collection. Individual blind boxes.
£5.99
-
Tomi Playful Kitty Figurine - Blind Box
Bring playful charm to any space with the Tomi Playful Kitty Figurine. This delightful collectible captures feline personality with vibrant details and a whimsical design. Perfect for cat lovers, collectors, and anyone seeking a touch of joy on their shelf or desk. Individual Blind Box
£5.99
-
Tomi Suprise Kitty Figurine - Blind Box
Discover the magic of mystery with the Tomi Surprise Kitty Figurine Blind Box. Each sealed box contains a unique collectible kitty figurine — you won't know which adorable design you'll get until you open it. Perfect for collectors and fans of surprise toys, these charming felines make wonderful additions to any collection or thoughtful gifts for friends. With multiple variants to chase, every unboxing is an exciting adventure. Collect them all and build your complete Tomi Kitty family. Individual blind boxes.
£5.99
-
USB C Battery
A USB C Battery
£39.99
-
Yabu Kland Kitt - Ji
Yabu Kland Kitt - Ji brings innovative design and reliable performance to your collection. Engineered with precision craftsmanship, this product delivers exceptional quality and durability.
£14.99
-
Yabu Mini Fluffy Duck
Meet the Yabu Mini Fluffy Duck — an adorable plush companion perfect for cuddles and imaginative play. Crafted with soft, premium materials, this pocket-sized duck features a charming design that appeals to children and collectors alike. Its gentle texture makes it ideal for comfort during bedtime or as a delightful gift. Lightweight and portable, take your fluffy friend anywhere for endless adventures and cosy moments.
£7.99
-
Yabu Mini Fluffy Hippo
Meet the Yabu Mini Fluffy Hippo — an adorable plush companion perfect for cuddles and imaginative play. Crafted from soft, touchable fabric, this pint-sized hippo features a charming design that appeals to children and collectors alike. Its compact size makes it ideal for snuggling in bed, taking on adventures, or displaying on a shelf.
£7.99
-
Yabu Mini Fluffy Husky
Meet the Yabu Mini Fluffy Husky — an adorable plush companion perfect for husky lovers of all ages. This soft, cuddly toy features the iconic husky markings and fluffy texture that makes it irresistible to squeeze and snuggle. Ideal for collectors, gift-giving, or simply brightening up any space with its charming presence. Bring home a pocket-sized piece of husky charm today.
£7.99
-
Yabu Mini Fluffy Panda
Adorable Yabu Mini Fluffy Panda — the perfect pocket-sized companion. Crafted with ultra-soft plush material, this cute panda features a huggable design ideal for collectors and cuddly toy enthusiasts alike. Lightweight and portable, it's great for display on shelves, desks, or as a comforting travel buddy. Bring home this charming little panda and add a touch of warmth to your space.
£7.99
-
Yabu Mini Fluffy Rabbit
Meet the Yabu Mini Fluffy Rabbit — an adorable plush companion perfect for cuddles and comfort. Crafted with ultra-soft materials, this pocket-sized friend features a gentle design ideal for children and collectors alike. Its fluffy texture and charming details make it a delightful addition to any room or the perfect gift for rabbit lovers of all ages.
£7.99
You have seen 144 out of 149 products