All Parts

The Game Boy Color USB-C Charging Kit PRO is a new circuit designed specifically for the Nintendo Game Boy Color. This all-in-one circuit includes not only the charging controller but also a boost converter and audio amplifier. Modern IPS displays with backlighting require more power than the original display, and flash carts used to load numerous games can quickly drain the battery. To truly enjoy the games, it is recommended to use a rechargeable battery instead of AA batteries. However, simply using a rechargeable battery is not sufficient. The increased power consumption puts a strain on the original electronics, potentially causing noise in the speaker or headphones. The typical solution is to add a charging circuit for the battery and a power converter to replace the old, inefficient one included in the GBC. Some individuals also add an audio amplifier to enhance the sound quality of the speaker. All these modifications make the GBC function optimally. However, installing them requires numerous cables and may be challenging for individuals without sufficient knowledge. Typical installation of the 3 modules: Photo by Sascha This board adds all these features with a clean and straightforward installation: Board version 3.1 FEATURES Exact shape for Game Boy Color. Li-Ion battery charger via USB-C with overvoltage and undervoltage protection. DC to DC converter with 5V output. (The board doesn’t support the original screen, only IPS screens are supported) Safe charge and play (from v3.1). Audio amplifier for the speaker. Integrated LED indicators on the main board, next to the USB port, for charging the battery (red) and full battery (green). These can be disabled via the SJ1 jumper. External LED indicators board for playing (white), charging the battery (red), and full battery (green). Optional installation. INCLUDED 1 frame panel, which includes the two boards: Main board. Light board. 1 battery cable (with JST SH1.0 connector) 1 two-wire cable for connecting the light board. 1 single-wire cable for connecting the board to the sound pad. 1 light diffuser pipe. REQUIRED (NOT INCLUDED) Li-ion battery New 8Ω 1W speaker (optional but recommended to avoid noise) New capacitors (optional but recommended to avoid noise) Cutting tool (optional but recommended) Tri-wing and Philips screwdrivers Cutting pliers Cutter Tweezers Soldering iron Tin Flux Isopropyl alcohol NOTES The latest version is 3.3. This is a note for v2.3, which doesn’t properly support “Safe charge and play.” Please, DO NOT charge and play at the same time to avoid any problems. (Read more about it here) PRODUCT FEATURE OVERVIEW   Charger Power Conv. 5V Power Conv. -19V Audio Amp Light Board AAA/AA Batteries USB-C DC Jack GBP GBC GB2 This product DOCUMENTATION Installation guide PDF (Current version) Installation guide PDF (Only v2.3) Video installation (v2.2) Video installation by Makho GitHub repository

Read more less

This AMOLED screen delivers perfect blacks and vibrant colors with exceptional contrast. The 25% larger display with integer scaling ensures crisp, pixel-perfect graphics. Eight color modes and 10 brightness levels offer full customization, while the laminated construction stays dust-free. Touch-activated OSD menu and retro pixel effects give you complete control. Minimal soldering required. The ultimate visual upgrade for Game Boy Color. Note: Trimming the shell is required for OEM Shells. We recommend using a laminated custom shell from Funnyplaying. This kit requires 1 wire to be soldered in so a soldering iron is required.  Please test the screen before installing. We cant accept returns on screens that may have been installed incorrectly. Any issues please contact support.   AMOLED Screen. High Definition OLED.16 pixels to 1 pixel. Integer scaling. Equipped with touch sensor above the logo. Laminated OLED for a dust free easy install! The screen is 25% larger than the original. Built-in On Screen Display Menu Built-in 4 Retro Pixel effects. Built-in 32 Logo Colors to choose from. FRM On/OFF function (Frame blending On/OFF) is included. 10 brightness levels. 8 color modes. Image position adjustable. Only one wire needs to be soldered to supply power. OSD Menu Operation: Touch the screen for 5 seconds to activate the OSD menu. Slide your finger on the screen to page up or down. Touch the triangle icon to adjust the items. Packing Including: 1x AMOLED. 1x PCB. 1x flex cables. 2x wires. This is only the AMOLED screen kit. Console NOT included

Read more less

The PlayStation 4 DualShock USB-C Kit is a custom board that lets you upgrade your controller by replacing the original MicroUSB connector with a modern, universal USB-C connector. Replace your old or damaged MicroUSB and upgrade to modern convenience. This USB-C kit lets you charge your controller using any standard USB-C charger, including those for your smartphone or laptop. This board is compatible with all revisions of PS4 controllers: PlayStation 4 DualShock 1st Gen (2013~2016) JDS-001 JDS-011 JDS-030 PlayStation 4 DualShock 2nd Gen (2016~2021) JDS-040 JDS-050 JDS-055 FEATURES Compatible with all versions of the PS4 controller. No soldering required. Includes longer new flexible flat cables for even easier installation. Charging your PS4 controller with: USB power banks USB-A chargers USB-C chargers USB-C PD chargers (normal speed, not fast) USB-A to USB-C cables USB-C to USB-C cables USB data support, like the original MicroUSB connector. INCLUDED 1 USB-C board 1 Flexible Flat Cable 12P 10CM 1 Flexible Flat Cable 14P 15CM REQUIRED (NOT INCLUDED) Phillips screwdriver Plastic opening tools Precision Diamond File Set Cutter DOCUMENTATION Installation guide PDF GitHub repository

Read more less

The PlayStation 2: USB-C Kit is a board that allows to replace the original power supply unit for a modern and standard USB-C. If your original power supply unit is too old or damaged and you need a new one, or if you would like to power up your PlayStation with a standard USB-C PD charger, such as the charger for your phone, or laptop, you can do so with this kit. This board is compatible with the following models: PlayStation One PlayStation 2 FAT PlayStation 2 SLIM (SCPH-7XXXX external power supply) PlayStation 2 SLIM (SCPH-9XXXX internal power supply) HOW DOES IT WORK? The USB-C Power Delivery technology (USB-C PD) allows for communication between the device and the power supply(charger), enabling the negotiation of the voltage to be supplied through the USB-C cable. In this case, the microchip included on this board is configured to request 9V or 12V(1), signaling to the charger that it requires 9V or 12V(1) to run on. If the charger is compatible, it will supply the requested voltage. If it’s not compatible, nothing will happen, and the PlayStation won’t power on. (1) The circuit has a selection solder jumper; if you solder it in one position, the circuit will require 9V, and if you solder it in the other position, it will require 12V from the power supply. FEATURES Exact shape for PlayStation 2. External power through USB-C. INCLUDED 1 USB-C board. 1 Power cable of 5cm. 3 Plastic cap for the USB-C board (black color) REQUIRED (NOT INCLUDED) For PlayStation 2: a two-wire 20AWG cable. For PlayStation 2 Slim SCPH-9XXXX: the internal power cable. Phillips screwdriver Soldering iron Desoldering pump Desoldering braid (mesh) Soldering tin Flux Isopropyl alcohol (for cleaning) Instant adhesive (e.g., Loctite or Super Glue) NOTES The PlayStation One and PlayStation 2 SLIM SCPH-7XXXX run on 9V, while the PlayStation FAT and PlayStation SCPH-9XXXX run on 12V. Make sure your power supply with Power Delivery (PD) can provide the necessary voltage for your console model. Also, ensure that the supplied current is equal to or as close as possible to the amount required by the console. All tests were conducted using the same power supply as the rest of our kits, providing: Ikea SJÖSS 45W 9V 12V 3A, 13€ You will also need a USB-C to USB-C cable for PD. If you don’t have one, these will work: Ikea SITTBRUNN USB-C to USB-C 1m Ikea LILLHULT USB-C to USB-C 1.5 m If your PS2 is the FAT model and you are going to use a hard drive, then you will need a power supply that provides more than 3A of current. Maybe 5A; otherwise, you may have startup issues. DOCUMENTATION Installation Guide PDF GitHub repository

Read more less

The SEGA Master System & Mega Drive USB-C Kit is a custom board that lets you upgrade your console by replacing the original power connector with a modern, universal USB-C connector. Replace your old or damaged power connector and upgrade to modern convenience. This USB-C mod kit lets you power your console using any standard USB-C charger, including those for your smartphone or laptop. This board is compatible with the following models: Master System 1 (1) Master System 2 (1) Mega Drive 1 (1) Mega Drive 2 (1) (1) There were so many mainboard revisions of each model; before purchasing, make sure your console, motherboard, and connector match the ones shown in the installation guide. FEATURES External power through USB-C. Fully compatible with any USB-C charger: USB power banks USB-A chargers USB-C chargers USB-C PD chargers USB-A to USB-C cables USB-C to USB-C cables INCLUDED 1 USB-C board 1 Mega Drive 1 board adapter 1 Plastic cap for the USB-C board 5 Single-pin headers 4 wires REQUIRED (NOT INCLUDED) Phillips screwdriver Soldering iron Kapton tape Soldering tin Flux Desoldering pump Desoldering braid Isopropyl alcohol DOCUMENTATION Installation guide PDF GitHub repository

Read more less

The Nintendo Wii U GamePad USB-C Kit is a custom board that lets you upgrade your console by replacing the original charging port with a modern, universal USB-C connector. Replace your old or damaged charging port and upgrade to modern convenience. This USB-C mod kit lets you charge your console using any standard USB-C charger, including those for your Nintendo Switch, smartphone, or laptop. This board is compatible with the following models: Nintendo Wii U GamePad FEATURES Charge your console using a wide range of modern USB power sources: USB power banks USB-A chargers USB-C chargers USB-C PD chargers (normal speed, not fast) USB-A to USB-C cables USB-C to USB-C cables INCLUDED 1 USB-C flexible board REQUIRED (NOT INCLUDED) Tri-wing screwdriver Phillips screwdriver Kapton tape (heat-resistant) Soldering iron Soldering tin (wire) Flux for electronics Desoldering pump Desoldering braid (mesh) Isopropyl alcohol (for cleaning) DOCUMENTATION Installation Guide PDF GitHub repository

Read more less

The Nintendo Wii: USB-C Kit is a board that allows you to replace the original power connector with a modern and standard USB-C port. If your original connector or power supply is too old or damaged and you need a new one, or if you would like to power your Nintendo Wii with a standard USB-C PD charger, such as the charger for your phone or laptop, you can do so with this kit. This board is compatible with the following models: Nintendo Wii Nintendo Wii Mini Nintendo Wii U HOW DOES IT WORK? The USB-C Power Delivery technology (USB-C PD) allows for communication between the device and the power supply(charger), enabling the negotiation of the voltage to be supplied through the USB-C cable. In this case, the microchip included on this board is configured to request 12V or 15V(1), signaling to the charger that it requires 12V or 15V(1) to run on. If the charger is compatible, it will supply the requested voltage. If it’s not compatible, nothing will happen, and the Nintendo Wii won’t power on. (1) The circuit has a selection jumper; if you solder it in one position, the circuit will require 12V, and if you solder it in the other position, it will require 15V from the power supply. FEATURES Similar size to the original connector. External power through USB-C. INCLUDED 1 USB-C board. 1 right-angle 2-pin header for Wii and Wii Mini 1 straight-angle 2-pin header for Wii U. 1 Plastic cap for the USB-C board (in black color) REQUIRED (NOT INCLUDED) Tri-wing and Phillips screwdrivers Soldering iron. Tin. Flux. Desoldering pump. Isopropyl alcohol. NOTES The Nintendo Wii and Wii Mini run on 12V and 3.5A, while the Nintendo Wii U runs on 15V and 5A. Make sure your power supply with Power Delivery (PD) can provide the necessary voltage for your console model. Also, ensure that the supplied current is equal to or as close as possible to the amount required by the console. The console’s disc reader consumes a significant amount of current, around 1.9A. So, if you don’t plan to use it for loading games, this can reduce the power requirements and allow you to use a power supply with lower specifications. All tests were conducted with the same power supply used for the GameCube kit, providing 12V or 15V and 3A: Ikea SJÖSS 45W 12V 15V 3A, 13€ You will also need a USB-C to USB-C cable for PD. If you don’t have one, these will work: Ikea SITTBRUNN USB-C to USB-C 1m Ikea LILLHULT USB-C to USB-C 1.5 m DOCUMENTATION Installation Guide PDF GitHub repository

Read more less

The Nintendo GameCube: USB-C Kit is a board that allows you to replace the original power connector with a modern and standard USB-C port. If your original connector or power supply is too old or damaged and you need a new one, or if you would like to power your Nintendo GameCube with a standard USB-C PD charger, such as the charger for your phone or laptop, you can do so with this kit. This board is compatible with the following models: Nintendo GameCube (DOL-001)  (1) (1) This mod is compatible with GameCubes that have this power board. If your GC has this other model, it is not compatible, since the power button needs to be reused, and in this version it isn’t a separate part that can be removed and reused. HOW DOES IT WORK? The USB-C Power Delivery technology (USB-C PD) allows for communication between the device and the charger, enabling the negotiation of the voltage to be supplied through the USB-C cable. In this case, the microchip included on this board is configured to request 12V, signaling to the charger that it requires 12V to operate. If the charger is compatible, it will supply the requested voltage. If it’s not compatible, nothing will happen, and the Nintendo GameCube won’t power on. FEATURES Exact shape for Nintendo GameCube. External power through USB-C. Extra fan connector for computer fans such as the Noctua NF-A4x10. INCLUDED 1 USB-C board. 1 Power connector. 1 Fan connector. 1 Fan connector with 3 pins. 1 Plastic cap for the USB-C board. REQUIRED (NOT INCLUDED) Original push button switch from the board to be replaced. 4.5mm gamebit and Phillips screwdrivers. Soldering iron. Tin. Flux. Desoldering pump. Isopropyl alcohol. NOTES This kit requires a special power supply that supports power delivery (PD) with an output of 12V and a minimum of 3A. Generally, laptop power supplies and some phone chargers can be used. If you don’t have any, take a look at the list of recommendations. (The Nintendo Switch power supply is not compatible because it doesn’t supply 12V). Ikea SJÖSS 45W 12V 3A, 13€ You will also need a USB-C to USB-C cable for PD. If you don’t have one, these will work: Ikea SITTBRUNN USB-C to USB-C 1m Ikea LILLHULT USB-C to USB-C 1.5 m DOCUMENTATION Installation Guide PDF GitHub repository

Read more less

The Super Nintendo: USB-C Kit is a board that allows you to replace the original power connector with a modern and standard USB-C port. If your original connector is too old or damaged and you need a new one, or if you would like to power up your Super Nintendo with a standard USB-C charger, such as the charger for your Nintendo Switch, phone, or laptop, you can do so with this kit. Moreover, with this board, you can remove the original, old, and inefficient power converter. Since the console operates at 5V, you only need the power from USB-C and a regular charger. FEATURES Exact shape for Super Nintendo / Super Famicom. External power through USB-C. INCLUDED 1 USB-C board. 1 Power cable. 1 Plastic cap for the USB-C board. REQUIRED (NOT INCLUDED) 4.5mm gamebit and Phillips screwdrivers. Cutting pliers Cutter Tin soldering iron. Tin. Flux. Isopropyl alcohol. NOTES Check the compatibility tab for more details on which models are compatible. DOCUMENTATION Installation Guide PDF GitHub repository

Read more less

The Nintendo NES: USB-C Kit is a board that allows you to replace the original power connector with a modern and standard USB-C port. If your original connector is too old or damaged and you need a new one, or if you would like to power your Nintendo NES with a standard USB-C charger, such as the charger for your Nintendo Switch, phone, or laptop, you can do so with this kit. Moreover, with this board, you can remove the original, old, and inefficient power converter. Since the console operates at 5V, you only need power from the USB-C connection and a regular charger. This board is compatible with the following models: Nintendo NES FEATURES Exact shape for Nintendo NES. External power through USB-C. INCLUDED 1 USB-C board. 1 Cable of two wires. 1 Plastic cap for the USB-C board. 1 Plastic cap retainer. REQUIRED (NOT INCLUDED) Phillips screwdriver Cutting pliers Soldering iron / hot-air soldering station Tin Flux Desoldering pump Desoldering mesh Isopropyl alcohol NOTES This mod disables the video output through the antenna connector, so you will always need to use the AV output. DOCUMENTATION Installation Guide PDF GitHub repository

Read more less

The Sony PS Vita Slim USB-C Kit is a custom board that lets you upgrade your console by replacing the original charging port with a modern, universal USB-C connector. Replace your old or damaged charging port and upgrade to modern convenience. This USB-C mod kit lets you charge your console using any standard USB-C charger, including those for your smartphone or laptop. This board is compatible with the following models: Sony PS Vita Slim FEATURES Charge your console using a wide range of modern USB power sources: USB power banks Standard USB-A wall chargers Modern USB-C wall chargers USB-C Power Delivery (PD) chargers (normal charging speed) USB-A to USB-C cables USB-C to USB-C cables USB data support for data transfer. INCLUDED 1 USB-C flexible board. REQUIRED (NOT INCLUDED) Phillips screwdriver Soldering iron / Hot air rework station Desoldering pump Desoldering braid (mesh) USB microscope Tweezers Scissors Cutting pliers Precision cutter Soldering tin Flux Solder mask Isopropyl alcohol (for cleaning) Kapton tape DOCUMENTATION Installation Guide PDF GitHub repository Installation video by Alien Gaming

Read more less

The Sony PS Go USB-C Kit is a custom board that lets you upgrade your console by replacing the original charging port with a modern, universal USB-C connector. Replace your old or damaged charging port and upgrade to modern convenience. This USB-C mod kit lets you charge your console using any standard USB-C charger, including those for your smartphone or laptop. This board is compatible with the following models: Sony PSP Go FEATURES Charge your console using a wide range of modern USB power sources: USB power banks USB-A chargers USB-C chargers USB-C PD chargers (normal speed, not fast) USB-A to USB-C cables USB-C to USB-C cables USB data support INCLUDED 1 USB-C board 2 cables 1 plastic cap to cover the hole (in grey color) REQUIRED (NOT INCLUDED) Phillips screwdriver Soldering iron / Hot air rework station Desoldering pump Desoldering braid (mesh) USB microscope Tweezers Scissors Cutting pliers Precision cutter Soldering tin Flux Solder mask Isopropyl alcohol (for cleaning) Kapton tape NOTES With this modification, you will lose the ability to connect the console to the TV. DOCUMENTATION Installation guide PDF GitHub repository

Read more less

The Sony PSP USB-C Kit is a custom board that lets you upgrade your console by replacing the original charging port with a modern, universal USB-C connector. Replace your old or damaged charging port and upgrade to modern convenience. This USB-C mod kit lets you charge your console using any standard USB-C charger, including those for your smartphone or laptop. This board is compatible with the following models: Sony PSP 2000 Sony PSP 3000 FEATURES Plastic holder made by a resin 3D printer. Charge your console using a wide range of modern USB power sources: USB power banks USB-A chargers USB-C chargers USB-C PD chargers (normal speed, not fast) USB-A to USB-C cables USB-C to USB-C cables INCLUDED 1 USB-C board 1 plastic part to hold the USB board (in grey color) 2 heat shrink tubes REQUIRED (NOT INCLUDED) The power cable from the original connector. Phillips screwdriver Soldering iron Tweezers Precision cutter Precision file tool set Soldering tin Isopropyl alcohol (for cleaning) Instant adhesive (e.g., Loctite or Super Glue) DOCUMENTATION Installation guide PDF GitHub repository

Read more less

The Sony PSP USB-C Kit is a custom board that lets you upgrade your console by replacing the original charging port with a modern, universal USB-C connector. Replace your old or damaged charging port and upgrade to modern convenience. This USB-C mod kit lets you charge your console using any standard USB-C charger, including those for your smartphone or laptop. This board is compatible with the following models: Sony PSP 1000 FEATURES Plastic holder made by a resin 3D printer. Charge your console using a wide range of modern USB power sources: USB power banks USB-A chargers USB-C chargers USB-C PD chargers (normal speed, not fast) USB-A to USB-C cables USB-C to USB-C cables USB data support, allowing you to connect two cables to the MiniUSB port (optional, cables not included). INCLUDED 1 USB-C board 1 plastic part to hold the USB board (in grey color) REQUIRED (NOT INCLUDED) The power cable from the original connector. Phillips screwdriver Soldering iron Tweezers Precision cutter Precision file tool set Soldering tin Isopropyl alcohol (for cleaning) Instant adhesive (e.g., Loctite or Super Glue) DOCUMENTATION Installation guide PDF GitHub repository

Read more less

The Nintendo 3DS USB-C Kit is a custom board that lets you upgrade your console by replacing the original charging port with a modern, universal USB-C connector. Replace your old or damaged charging port and upgrade to modern convenience. This USB-C mod kit lets you charge your console using any standard USB-C charger, including those for your Nintendo Switch, smartphone, or laptop. This board is compatible with the following models: Nintendo 3DS Nintendo 3DS XL Nintendo New 3DS Nintendo New 3DS XL The kit also includes a plastic insert that holds the original dock’s metal contacts, allowing you to charge your Nintendo 3DS via USB-C and still use the original charging dock. FEATURES High-quality castellated holes and pads for easy soldering (since v1.2). Custom resin 3D-printed plastic holder for full charging dock compatibility. Charge your console using a wide range of modern USB power sources: USB power banks Standard USB-A wall chargers Modern USB-C wall chargers USB-C Power Delivery (PD) chargers (normal charging speed) USB-A to USB-C cables USB-C to USB-C cables INCLUDED 1 USB-C board 4 custom 3D-printed plastic parts: Alignment tool to center the board during installation (random color) Dock contact holder for charging dock compatibility (random color) Rear cap to cover the port hole on OLD 3DS models (gray color) Rear cap to cover the port hole on NEW 3DS models (black color) REQUIRED (NOT INCLUDED) Original dock metal contacts (optional, for charging dock support) Tri-wing screwdriver Phillips screwdriver Scissors Precision file tool set Kapton tape (heat-resistant) Soldering iron Soldering tin (wire) Flux for electronics Desoldering pump Desoldering braid (mesh) Isopropyl alcohol (for cleaning) Instant adhesive (e.g., Loctite or Super Glue) DOCUMENTATION Installation guide PDF GitHub repository Installation video by Zac Builds on Nintendo New 3DS XL

Read more less

This product is a modified version of the Nintendo DSi, 2DS & 3DS USB-C Kit. It’s not a substitute but rather an alternative for customers who need specific functionalities. This product includes a shorter USB-C connector with data connection support. This means you can solder components to the USB board that require the connector to send or receive data via the USB protocol. The most common use case is for video capture boards that send video via USB to a computer. With this kit, you can have your DSi,  2DS or 3DS equipped with a single connector for both power and data, instead of needing two connectors: one for power and another for data. This product can never be used to access the console’s MicroSD.    

Read more less

The Nintendo DS Lite USB-C kit is a custom board that lets you upgrade your device by replacing the original power connector with a modern, universal USB-C connector. Replace your old or damaged connector and upgrade to modern convenience. This USB-C mod kit lets you charge your device using any standard USB-C charger, including those for your smartphone or laptop. This board is compatible with the following models: Nintendo DS Lite FEATURES The USB-C connector matches 100% perfectly with the original connector shape. Charge your console using a wide range of modern USB power sources: USB power banks USB-A chargers USB-C chargers USB-C PD chargers (normal speed, not fast) USB-A to USB-C cables USB-C to USB-C cables INCLUDED 1 USB-C flexible board REQUIRED (NOT INCLUDED) Tri-wing screwdriver Phillips screwdriver Kapton tape (heat-resistant) Soldering iron Soldering tin (wire) Flux for electronics Desoldering pump Desoldering braid (mesh) Isopropyl alcohol (for cleaning) NOTES Unlike the previous version, which was just a connector, this one allows chargers and cables with a USB-C to USB-C connector, meaning full compatibility with any charger and cable. DOCUMENTATION Installation Guide PDF GitHub repository

Read more less

The Game Boy Micro USB-C Kit is a custom board that lets you upgrade your console by replacing the original charging port with a modern, universal USB-C connector. Replace your old or damaged charging port and upgrade to modern convenience. This USB-C mod kit lets you charge your console using any standard USB-C charger, including those for your Nintendo Switch, smartphone, or laptop. This board is compatible with the following models: Game Boy Micro FEATURES Exact shape for Game Boy Micro and easy to install. Charge your console using a wide range of modern USB power sources: USB power banks USB-A chargers USB-C chargers USB-C PD chargers (normal speed, not fast) USB-A to USB-C cables USB-C to USB-C cables Multiplayer connection support through an adapter INCLUDED 1 USB-C flexible board REQUIRED (NOT INCLUDED) Tri-wing screwdriver Phillips screwdriver Kapton tape (heat-resistant) Soldering iron Soldering tin (wire) Flux for electronics Desoldering pump Desoldering braid (mesh) Isopropyl alcohol (for cleaning) Instant adhesive (e.g., Loctite or Super Glue) DOCUMENTATION Installation Guide PDF GitHub repository

Read more less

The Game Boy Color USB-C Charging Kit is a circuit that allows you to charge a Nintendo Game Boy Color via USB-C and use a Li-ion battery instead of AA batteries. This kit includes two boards. If you want an easy installation, the main board is sufficient and doesn’t require any additional cables to function. However, if you want to have the status LEDs in the same place as the original status LED, then you will need to solder the second board and connect both with 3 cables. You can choose the best option for you. FEATURES Exact shape for Game Boy Color. Li-Ion battery charger via USB-C with overvoltage and undervoltage protection. Integrated LED indicators on the main board, next to the USB port, for charging the battery (red) and full battery (green). These can be disabled via the SJ1 jumper. External LED indicators board for playing (white), charging the battery (red), and full battery (green). Optional installation. INCLUDED 1 frame board, which includes the two boards: charging and light. 1 battery cable (with JST SH1.0 connector) 1 two-wire cable for connecting the light board. 1 light diffuser pipe. REQUIRED (NOT INCLUDED) Li-ion battery Philips #00 and Tri-wing security screwdrivers Cutting pliers Cutter Tweezers Soldering iron Tin Flux Isopropyl alcohol Cutting tool (optional) NOTES This module has been designed to be used with the console’s original voltage regulator, as it supports an input voltage range between 2 and 4.6V, and the battery kit provides a voltage between 2.75 and 4.2V. If you also want to replace the original power supply, it’s important that it is compatible with the voltage provided by the battery kit; otherwise, you may damage the console. Since version 1.7, the shape has changed, but the features remain the same. The battery connector has been moved to a place where cutting the plastic shell is no longer necessary. PRODUCT FEATURE OVERVIEW   Charger Power Conv. 5V Power Conv. -19V Audio Amp Light Board AAA/AA Batteries USB-C DC Jack This Product GB2 GBP Pro GBC Pro DOCUMENTATION Installation guide PDF Video installation (old version) Article on giltesa.com (old version) GitHub repository

Read more less

This is a new light diffuser pipe made with a resin 3D printer for your Game Boy Pocket/Color USB-C Charging Kits. This product is already included with the kits. However, if you have a previous version or you lost it, you have the option to order it separately. FEATURES This light diffuser pipe is made to the exact size of the original shell hole. Its base is crescent-shaped; that side should be facing the IPS screen to avoid issues during installation. INCLUDED 3 light diffuser pipes (in clear white color since 2023-06) NOTES Due to differences between monitors, the picture may not accurately reflect the actual color of the light diffuser pipe. DOCUMENTATION GitHub repository

Read more less

This plastic tool, made with a 3D printer, will help you make a perfect hole in your Game Boy Pocket shell. It works as a template, ensuring that the hole is drilled in the exact place where it needs to be. FEATURES A plastic tool printed in PLA with a layer height of 0.2mm. It may be usable more than once when using the appropriate drill bits. INCLUDED 1 x USB-C Cutting Tool REQUIRED (NOT INCLUDED) Permanent marker Cutter Rotary tool like a Dremel with drill bits or diamond burs for cutting the hole. DOCUMENTATION Cutting Tool Guide GitHub repository

Read more less

The Game Boy Pocket USB-C Charging Kit PRO is a new circuit designed specifically for the Nintendo Game Boy Pocket. This all-in-one circuit includes not only the charging controller but also a boost converter and an audio amplifier. Modern IPS displays with backlighting require more power than the original display, and flash carts used to load tons of games can quickly drain the battery. To truly enjoy the games, it is recommended to use a rechargeable battery instead of AAA batteries. However, simply using a rechargeable battery is not sufficient. The increased power consumption puts a strain on the original electronics, potentially causing noise in the speaker or headphones. The typical solution is to add a charging circuit for the battery and a power converter to replace the old, inefficient one included in the GBP. Some individuals also add an audio amplifier to enhance the sound quality of the speaker. All these modifications make the GBP function optimally. However, installing them requires numerous cables and may be challenging for individuals without sufficient knowledge. This board adds all these features with a clean and straightforward installation:   FEATURES Exact shape for Game Boy Pocket. External power through USB-C.(1) Compatibility with all types of USB cables or external batteries. Li-Ion battery charger with overvoltage and undervoltage protection.(1) Power DC converter with a 5V output.(2) Safe charge and play. Audio amplifier for the speaker. Integrated LED indicators on the main board, next to the USB port, for charging (red) and full battery (green). These can be disabled via the SJ1 jumper. External LED indicators board for playing (white), charging (red), and full battery (green). Optional installation. (1) The USB-C port and Li-ion battery require trimming of the shell. (2) Provides stable power to your Game Boy, IPS screen, and flash cart. However, it doesn’t supply the -19V rail, which means the stock screen or the GBP IPS screen that adjusts brightness through the contrast wheel will not be able to change the brightness level and will remain at its maximum level. INCLUDED 1 frame panel which includes the three boards: Main board. USB-C board. Light board. 1 battery cable (with JST SH1.0 connector) 1 two-wire cable for connecting the light board. 1 single-wire cable for connecting the board to the sound pad. 1 light diffuser pipe. REQUIRED (NOT INCLUDED) Li-ion battery New 8Ω 1W speaker (optional but highly recommended to avoid noise, for example, this one) New capacitors (optional but recommended to avoid noise) Tri-wing and Phillips screwdrivers Cutting pliers Cutter Tweezers Soldering iron Tin Flux Isopropyl alcohol NOTES The stock screen is not compatible with this module; only IPS screens will work with it. The contrast wheel doesn’t function because the -19V rail is not provided by this kit. This means that the GBP Retro Pixel IPS screen is unable to adjust its brightness. This board is recommended for IPS screens with a touch sensor designed for brightness control. PRODUCT FEATURE OVERVIEW   Charger Power Conv. 5V Power Conv. -19V Audio Amp Light Board AAA/AA Batteries USB-C DC Jack GBP GBC GB2 This Product DOCUMENTATION Installation guide PDF GitHub repository

Read more less

The Game Boy Pocket USB-C Charging Kit is a circuit that allows you to charge a Nintendo Game Boy Pocket via USB-C and use a Li-ion battery instead of AAA batteries. FEATURES Exact shape for Game Boy Pocket. Li-Ion battery charger via USB-C with overvoltage and undervoltage protection. Integrated LED indicators on the main board, next to the USB port, for charging (red) and full battery (green). These can be disabled via the SJ1 jumper. External LED indicators board for playing (white), charging (red), and full battery (green). Optional installation. INCLUDED 1 frame panel which includes the three boards: Main board. USB-C board. Light board. 1 battery cable (with JST SH1.0 connector) 1 two-wire cable for connecting the light board. 1 light diffuser pipe. REQUIRED (NOT INCLUDED) Li-ion battery (for example, a 102045; maximum space available: 10(T)x20(W)x47(L)mm, cutting the shell) Phillips #00 and tri-wing security screwdrivers Tweezers Cutter Cutting pliers Soldering iron Tin Flux Desoldering pump Desoldering mesh Isopropyl alcohol Instant glue (Loctite, Super Glue) NOTES This module has been designed to be used with the console’s original voltage regulator, as it supports an input voltage range between 2 and 4.6V, while the battery kit provides a voltage between 2.75 and 4.2V. If you also want to change the original power supply, it’s important to ensure it is compatible with the voltage provided by the battery kit; otherwise, you may damage the components. PRODUCT FEATURE OVERVIEW   Charger Power Conv. 5V Power Conv.-19V Audio Amp Light Board AAA/AA Batteries USB-C DC Jack This Product GB2 GBP Pro GBC Pro DOCUMENTATION Installation guide PDF (current version) Installation guide PDF (v1.2 or earlier) Video installation (v1.2) GitHub repository

Read more less

This plastic tool made with a 3D printer will help you make a perfect hole in your Game Boy DMG shell. It works as a template, helping you drill the hole exactly where it needs to be. FEATURES A plastic tool printed in PLA with a layer height of 0.2mm. It may be usable more than once. INCLUDED 1 x USB-C Cutting tool REQUIRED (NOT INCLUDED) Permanent marker Cutter Rotary tool like a Dremel with drill bits or diamond burs for cutting the hole. DOCUMENTATION Cutting Tool Guide GitHub repository

Read more less

This is a new light diffuser pipe made with a resin 3D printer for your Game Boy DMG USB-C Charging Kits. This product is already included with the kits. However, if you lost it or need more, you have the option to order it separately. FEATURES This light diffuser pipe is made to the exact size of the original shell hole. INCLUDED 3 light diffuser pipes NOTES Due to differences between monitors, the picture may not accurately reflect the actual color of the light diffuser pipe. DOCUMENTATION GitHub repository

Read more less

The Game Boy DMG USB-C Charging Kit PRO is a new circuit designed specifically for the Nintendo Game Boy. This all-in-one circuit includes not only the charging controller but also a boost converter and an audio amplifier. Modern IPS displays with backlighting require more power than the original display, and flash carts used to load numerous games can quickly drain the battery. To truly enjoy the games, it is recommended to use a rechargeable battery instead of AA batteries. However, simply using a rechargeable battery is not sufficient. The increased power consumption puts a strain on the original electronics, potentially causing noise in the speaker or headphones. The typical solution is to add a charging circuit for the battery and a power converter to replace the old, inefficient one included in the Game Boy. Some individuals also add an audio amplifier to enhance the sound quality of the speaker. All these modifications make the Game Boy function optimally. However, installing them requires numerous cables and may be challenging for individuals without sufficient knowledge. This board adds all these features with a clean and straightforward installation: FEATURES Exact shape for Game Boy DMG. External power through USB-C.(1) Compatibility with all types of USB cables or external batteries. Li-Ion battery charger with overvoltage and undervoltage protection.(1) Power DC converter with a 5V output.(2) Safe charge and play. Audio amplifier for the speaker, amplifying both channels. Integrated LED indicators on the main board for charging (red) and full battery (green). These can be disabled via the SJ1 jumper. External LED indicators board for playing (white), charging (red), and full battery (green). Optional installation. (1) The USB-C port and li-ion battery require trimming of the shell. (2) Provides stable power to your Game Boy, IPS screen, and flash cart. However, it doesn’t supply the -19V rail, which means the original screen cannot be used. INCLUDED 1 frame panel which includes the three boards: Main board USB-C board Light board 1 Battery cable 10cm (with JST SH1.0 2p connector) 1 Audio cable 15cm (with JST 1.25 2p connector) 1 Speaker cable 10cm (with JST 1.25 2p connector) 1 Light board cable 10cm (with JST 1.25 2p connector) 1 Power cable 15cm (with JST 1.25 5p connector) 1 Header with 3 pins 1 Plastic holder for the USB-C board 1 Light diffuser pipe REQUIRED (NOT INCLUDED) Li-ion battery New 8Ω 1W speaker (optional but highly recommended to avoid noise, for example, this one) Tri-wing and Philips Screwdrivers Cutting Pliers Cutter Tweezers Soldering iron Tin Flux Isopropyl alcohol NOTES The kit is for IPS screens that only require the 5V rail. The original screen or other screens that require the -19V rail will not work. DOCUMENTATION Installation Guide PDF GitHub repository

Read more less

Transform your GameCube with this stunning warm red replacement shell. Crafted from premium semi-transparent ABS plastic, this 1:1 precision replica delivers authentic aesthetics while maintaining the durability of the original housing. Pre-assembled and ready to install, it's compatible with all Nintendo GameCube consoles across NTSC and PAL regions. The semi-transparent design showcases your console's internal components in eye-catching red and black, giving your GameCube a fresh, modern look without compromising functionality. Perfect for collectors and enthusiasts seeking a cosmetic upgrade that preserves the classic GameCube form factor. Specifications: Dimensions: 260 x 155 x 110 mm Weight: 0.6 kg Material: Premium semi-transparent ABS Plastic Compatibility: Nintendo GameCube (all regions) Includes: 1 x Replacement Shell

Read more less

Transform your GameCube with this stunning transparent ice blue replacement shell. Crafted from premium semi-transparent ABS plastic, this 1:1 precision replica delivers authentic aesthetics while maintaining the durability of the original housing. Pre-assembled and ready to install, it's compatible with all Nintendo GameCube consoles across NTSC and PAL regions. The semi-transparent design showcases your console's internal components in eye-catching blue, giving your GameCube a fresh, modern look without compromising functionality. Perfect for collectors and enthusiasts seeking a cosmetic upgrade that preserves the classic GameCube form factor. Specifications: Dimensions: 260 x 155 x 110 mm Weight: 0.6 kg Material: Premium semi-transparent ABS Plastic Compatibility: Nintendo GameCube (all regions) Includes: 1 x Replacement Shell

Read more less

Transform your GameCube with this stunning transparent white replacement shell. Crafted from premium semi-transparent ABS plastic, this 1:1 precision replica delivers authentic aesthetics while maintaining the durability of the original housing. Pre-assembled and ready to install, it's compatible with all Nintendo GameCube consoles across NTSC and PAL regions. The semi-transparent design showcases your console's internal components in eye-catching white, giving your GameCube a fresh, modern look without compromising functionality. Perfect for collectors and enthusiasts seeking a cosmetic upgrade that preserves the classic GameCube form factor. Specifications: Dimensions: 260 x 155 x 110 mm Weight: 0.6 kg Material: Premium semi-transparent ABS Plastic Compatibility: Nintendo GameCube (all regions) Includes: 1 x Replacement Shell

Read more less

Transform your GameCube with this stunning transparent black replacement shell. Crafted from premium semi-transparent ABS plastic, this 1:1 precision replica delivers authentic aesthetics while maintaining the durability of the original housing. Pre-assembled and ready to install, it's compatible with all Nintendo GameCube consoles across NTSC and PAL regions. The semi-transparent design showcases your console's internal components in eye-catching black, giving your GameCube a fresh, modern look without compromising functionality. Perfect for collectors and enthusiasts seeking a cosmetic upgrade that preserves the classic GameCube form factor. Specifications: Dimensions: 260 x 155 x 110 mm Weight: 0.6 kg Material: Premium semi-transparent ABS Plastic Compatibility: Nintendo GameCube (all regions) Includes: 1 x Replacement Shell

Read more less

Transform your GameCube with this stunning transparent blue replacement shell. Crafted from premium semi-transparent ABS plastic, this 1:1 precision replica delivers authentic aesthetics while maintaining the durability of the original housing. Pre-assembled and ready to install, it's compatible with all Nintendo GameCube consoles across NTSC and PAL regions. The semi-transparent design showcases your console's internal components in eye-catching blue, giving your GameCube a fresh, modern look without compromising functionality. Perfect for collectors and enthusiasts seeking a cosmetic upgrade that preserves the classic GameCube form factor. Specifications: Dimensions: 260 x 155 x 110 mm Weight: 0.6 kg Material: Premium semi-transparent ABS Plastic Compatibility: Nintendo GameCube (all regions) Includes: 1 x Replacement Shell

Read more less

Transform your GameCube with this stunning transparent green replacement shell. Crafted from premium semi-transparent ABS plastic, this 1:1 precision replica delivers authentic aesthetics while maintaining the durability of the original housing. Pre-assembled and ready to install, it's compatible with all Nintendo GameCube consoles across NTSC and PAL regions. The semi-transparent design showcases your console's internal components in eye-catching green, giving your GameCube a fresh, modern look without compromising functionality. Perfect for collectors and enthusiasts seeking a cosmetic upgrade that preserves the classic GameCube form factor. Specifications: Dimensions: 260 x 155 x 110 mm Weight: 0.6 kg Material: Premium semi-transparent ABS Plastic Compatibility: Nintendo GameCube (all regions) Includes: 1 x Replacement Shell

Read more less

Transform your GameCube with this stunning transparent purple replacement shell. Crafted from premium semi-transparent ABS plastic, this 1:1 precision replica delivers authentic aesthetics while maintaining the durability of the original housing. Pre-assembled and ready to install, it's compatible with all Nintendo GameCube consoles across NTSC and PAL regions. The semi-transparent design showcases your console's internal components in eye-catching purple, giving your GameCube a fresh, modern look without compromising functionality. Perfect for collectors and enthusiasts seeking a cosmetic upgrade that preserves the classic GameCube form factor. Specifications: Dimensions: 260 x 155 x 110 mm Weight: 0.6 kg Material: Premium semi-transparent ABS Plastic Compatibility: Nintendo GameCube (all regions) Includes: 1 x Replacement Shell

Read more less